ALLNET ALL0140-2SFP+-10GPCI Express v3.0 x8 Dual Port SFP+ 10 Gigabit Server Adapter (Intel X710- BM2 Based)Overview: ALL0140-2SFP+-10Gis ALLNET a new generation of high-performance server adapter, based on the Intel X710-BM2 controller. The Server Adapter addresses the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks and proven, reliable performance. The ALL0140-2SFP+-10Gadapter delivers superior performance in a PCI Express v3.0 x8 slot. Optimized performance vectors and key uses include:\u2022Small Packet Performance: Achieves wire-rate throughput on smaller payload sizes (>64 Bytes for 10 GbE)\u2022Bulk Transfer Performance: Delivers line-rate performance with low CPU usage for large application buffers \u2022Network Virtualization: Network virtualization overlay offloads including Geneve, VXLAN, and NVGRE\u2022Storage Performance: Enables competitive performance with native OS drivers and intelligent offload for NAS (NFS, SMB), and SAN (iSCSI and FCoE) Key Features \u2022 Dual \u2013Port 10GbE Server Adapter \u2022 PCI Express* (PCIe) 3.0, x8 \u2022 Exceptional Low Power Adapters \u2022 Network Virtualization offloads including Geneve, VXLAN and NVGRE \u2022 Intel\u00ae Ethernet Flow Director for hardware based application traffic steering \u2022 Intel\u00ae Data Plane Developer Kit (DPDK) optimized for efficient packet processing \u2022 Excellent small packet performance for network appliances and Network Function Virtualization (NFV) \u2022 Intelligent offloads to enable high performance with Intel\u00ae Xeon\u00ae processor-based servers \u2022 I\/O virtualization innovations for maximum performance in a virtualized server \u2022 Unified networking providing a single wire support for LAN and storage: NAS (SMB, NFS) and SAN (iSCSI, FCoE) A Complete, Unified Networking Solution Converging data and storage onto one fabric eliminates the need for multiple adapters, cables and switches. Furthermore 10 gigabit Ethernet provides the bandwidth to converge these multiple fabrics onto a single wire. A key capability that makes all this possible is traffic class separation provided by Data Center Bridging (DCB) \u2014providing a one-wire solution with virtual pipes for the different classes of traffic: \u2022 Data: Best effort delivery of standard LAN traffic \u2022 Storage: Lossless network for FCoE and iSCSI \u2022 Management: Guaranteed connectivity of data center IP management Power Savings Power efficiency is critical to IT specialists as energy consumption is a real OpEx concern.\u2022 Lowest Power Consumption The new generation of ALL0140-2SFP+-10Gadapters are power misers. They deliver double the throughput with only half the power of the previous ALL0140-2SFP+-10G\u2022 EEE (IEEE 802.3az) Reduces power consumption during periods of low data activity. Energy is used to maintain the physical layer transmitters in a "ready state\u201d to transmit data on the wire. During periods of low data traffic, EEE sends a low-power-idle signal to put the transmitters into a "low power state\u201d saving power and cost. When data needs to be sent, EEE sends a normal idle signal to wake up the transmit system before data is due to be sent so there is no degradation of performance. Server Virtualization With Intel Virtualization Technology (VT), the ALL0140-2SFP+-10Gdeliver outstanding I\/O performance in virtualized server environments. They reduce I\/O bottlenecks by providing intelligent offloads for networking traffic per virtual machine (VM), enabling near-native performance and VM scalability. The host-based virtualization technologies supported by Intel VT include:\u2022 VMDq for Emulated Path: Adapter-based VM Queue sorting enabling efficient hypervisor-based switching\u2022 SR-IOV for Direct Assignment: Adapter-based isolation and switching for various virtual station instances enabling optimal CPU usage in virtualized environments. Additionally, ALL0140-2SFP+-10G provide Virtual Bridging support that delivers both host-side and switch-side control and management of virtualized I\/O as well as the following modes of virtualized operation:VEPA : IEEE 802.1Qbg support for Virtual Ethernet Port AggregatorVEB: Virtual Ethernet Bridge support via Intel\u00ae VT Network Virtualization Network virtualization is the next big trend in creating an agile data center. The ALL0140-2SFP+-10Gadapter is ready to help you take that next step.\u2022 VXLAN, NVGRE, GENEVE Offloads: These stateless offloads preserve application performance for overlay networks. With these offloads it is possible to distribute network traffic across CPU cores. At the same time X710 offloads LSO, GSO, and check-sum from the host software reducing CPU overhead. Intel\u00ae Ethernet Flow Director Flow Director is an advanced traffic steering capability built into the X710 controller. It consists of a large number of flow affinity filters that direct receive packets by their flows to queues for classification, load balancing, and matching between flows and CPU cores. It eliminates context switching required within the CPU. As a result, Flow Director significantly increasing the number of transactions per second and reduces latency for cloud applications like Memcached.Intelligent Offloads The Intel Xeon processor family has demonstrated increased computing performance and increased integration of key server subsystems generation after generation. To offload is to leverage the ever-escalating computing power of the Xeon processor where appropriate and implementing complementary accelerations in the network controller\u2014this is what Intel refers to as \u201dintelligent offloads.\u201d By employing a balanced hybrid of compute and offload, intelligent offloads are able to achieve the optimized point of performance and efficiency. This is most notably observed in the following usage models:\u2022 TCP Stateless Offloads: Demonstrates leading performance vs. TOE solutions without restricting feature usage (TOE usage usually requires that key features be disabled). Supported stateless offloads include Checksum, TSO, VMDq, and RSS.\u2022 Host iSCSI \/FCoE Initiators: Providing exceptional performance without the need for full-offload HBA2 methods.\u2022 Flow Classification: Trafficking data flows across multiple consumers and connections. Manageability ALL0140-2SFP+-10Galso incorporate the manageability required by IT personnel for remote control and alerting. Communication to the Board Management Controller (BMC) is available either through an on-board SMBus port or the DMTF-defined NC-SI, providing a variety of management protocols, including IPMI, BMC Pass-thru, OS2BMC, and MCTP\/SMBus and MCTP\/PCIe. FEATURES General Intel\u00ae X710-BM2 10 Gigabit Ethernet Controller SFP+ Connectivity Low-profile Full-height Load balancing on multiple CPUs iSCSI remote boot support Fibre Channel over Ethernet (FCoE) support Support for most network operating systems RoHS-compliant Intel\u00ae PROSet Utility for Windows*Device Manager Time Sync (IEEE 1588*, 802.1as) I\/O Features for Multi-core Processor Servers Intel\u00ae Flow Director MSI-X support Multiple Queues: 1,536 Tx and Rx queues per port Tx\/Rx IP, SCTP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities Virtualization Features Next-Generation VMDq Up to 256 maximum VMDq VMs supported PCI-SIG SR-IOV Implementation (128 per device) Virtual Machine Load Balancing(VLMB) Advanced Packet Filtering VLAN support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags VXLAN and NVGRE Support Manageability Features Preboote Xecution Environment (PXE) Support Simple Network Management Protocol (SNMP) and Remote Network Monitoring (RMON) Statistic Counters iSCSI Boot Watchdog Timer Adapter Product Features Intel\u00ae PROSet Utility Plug and play specification support Receive Side Scaling Advanced Software Feature Adapter fault tolerance (AFT) Switch fault tolerance (SFT) Adaptive load balancing (ALB) Teaming support IEEE 802.3ad (link aggregation control protocol) PCIe Hot Plug*\/Active Periphera component interconnect (PCI) IEEE 802.1Q* VLANs IEEE 802.3 2005* flow control support Tx\/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol(TCP), user datagram protocol (UDP), Internet protocol (IP) IEEE 802.1p* TCP segmentation large send offload MSI-X supports Multiple Independent Queues Interrupt moderation IPv6 offloading \u2014 Checksum and segmentation capability extended to new standard packet type Network Operating Systems (NOS) Software Support Windows Server* 2012 R2 Windows Server 2012 R2 Core Windows Server 2012 Windows Server 2012 Core Windows Server 2008 R2 Windows Server 2008 R2 Core Linux* Stable Kernel version 2.6.32\/3x Linux* RHEL 6.5 and RHEL 7.0 Linux* SLES 11 SP3 and SLES 12 FreeBSD* 9 and FreeBSD* 10 UEFI* 2.1 UEFI* 2.3 VMware ESXi 5.1(Limited Functionality) VMware ESXi 5.5 Specifications General Connections Dual SFP+ cages for: \u2022 SFP+ SR fiber-optic transceivers \u2022 SFP+ LR fiber-optic transceivers \u2022 SFP+ Direct Attach cables Network Standard IEEE 802.3 Physical Layer Interface 10GBASE-SR (LRXP8510-X3ATL) 10GBASE-LR (LRXP1310-10ATL) SFF-8431: 10GSFP+ DAC (Direct Attach Copper) Technical Features Data rate supported per port \u2022 Optical: 1 GbE\/10 GbE \u2022 Direct Attach: 10 GbE Bus type PCI Express 3.0 (8 GT\/s) Bus Width x8 PCI Express Interrupt levels INTA, MSI, MSI-X Hardware certifications FCC, CE Controller-processor Intel\u00ae Ethernet Controller X710-BM2 Power Consumption Dual-port 10GBASE-SR Typical Power 4.3W Maximum Power 4.8W Dual-port 1000BASE-SX Typical Power 4.0W Maximum Power 4.3W Dual-port 10GBASE-LR Typical Power 4.5W Maximum Power5.1W Dual-port Direct Attach (Twinax) Typical Power 3.3W Maximum Power3.7W Air Flow Minimum of 1 50 LFM required Operating temperature 0 \u00b0C to 55 \u00b0C (32 \u00b0F to 131 \u00b0F) Storage temperature -40 \u00b0C to 70 \u00b0C (-40 \u00b0F to 158 \u00b0F) Storage humidity Maximum: 90% non-condensing relative humidity at 35 \u00b0C LED Indicators LINK (solid) and ACTIVITY (blinking) LINK SPEED (green=10 Gbps yellow=1 Gbps) Ordering Information: M\/N Description ALL0140-2SFP+-10G PCI Express v3.0 x8 Dual Port SFP+ 10 Gigabit Server Adapter (Intel X710-BM2 Based) PS: Above details are only for reference, if there are any changes, no inform will have. ATTENTION: works only with INTEL or compatible MSA code GBICS Treiberdownload<\/p>\n","protected":false},"excerpt":{"rendered":"
ALLNET ALL0140-2SFP+-10G \/ PCIe 10GB Dual SFP+ Fiber Card Server<\/p>\n","protected":false},"featured_media":119530,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"product_brand":[1329],"product_cat":[63,18,842,389],"product_tag":[],"class_list":["post-67947","product","type-product","status-publish","has-post-thumbnail","product_brand-allnet","product_cat-netzwerk-aktive-komponenten","product_cat-netzwerk-server","product_cat-netzwerkkarten-lwl","product_cat-server-adapter","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"yoast_head":"\n